Abration tester

Abrasion Tester
Coated surfaces need to be tested for resistance to abrasion caused by a brush, sponge, emry prapare, or other means.

Impact tester

TUBULAR IMPACT TESTER
This test also called as “ Falling Weight Test.“ This test is used for evaluating impact resistance of a coating to cracking and peeling from a substrate when it is subjected to a deformation caused by a falling weight.
Precision Technologies is manufacturing this instrument as per DIN and ASTM
Standard specifications.

Drying time measuring

Drying Time Measuring Instrument:
Scope: - this instrument is designed for measuring the drying time of coating, which applied on paper or metallic panel.
Principal: -A ballpoint is travel on the wet film at a const speed. This speed is proportional to time piece (watch) mechanism. This ballpoint leaves the traveling path on the film. When the coating film start drying it become harder slowly. At this junction the ball get lifted above the dry film and shows the rubbing path on film. After completion of one circle of ballpoint observed the ballpoint path. Mark the starting point and the point of rubbing action, which indicate the drying point.

Cross Cut tester

CROSS-CUT (HATCH) CUTER:
This test is widely used in various forms to assess adhesion of coated film on metallic sheet. This cutter is very simple to use.LAB-FINE is manufacturing these cutters with 1,2 and 3mm spaces between cutting edges. The template is available with single point blade

Scratch Hardness tester

Scratch Hardness TesterThis machine is used for determination and measuring the resistance offered by the coated film on metallic sheet by scratching standard specific hard ball point needle.The design is complies with: -BS3900 PART E.Silence Features: -*The full tungsten carbide material is used for needle hence no ballpoint peels off from shank.*Panel mounting platform is free from dent and screw head depression, which causes for damage to the needle.*The film penetration is indicated by light and bouzer so that operator can fully concentric on actual scratch operation rather than voltmeter needle deflection.Result: - The report is presented I two ways.(a) A minimum weight is fixed before the test and test is carried only to test pass or fail to that particular wt.(b) The report is presented at which minimum weight the film get

Coating thickness guages

Coating thickness gauges:
It’s a simple, accurate, easiest to use, budget priced, digital portable pocket sized coating thickness gauge in the market with a user-friendly big size display for operation at all locations.
Easy to use by any operator with single keypad operation and automatic switch off when no reading is being taken.
Non Destructive coating thickness gauges for all types of application to measure ferrous, non ferrous, non-ferromagnetic, metal substrates coating on steel and Iron substrates, Examples: Paint, Epoxy, Tin, Copper, Zinc, Cadmium, Galvanizing, Electroplating, Metal Spray, Chrome, Powder Coating, Film, Thin Sheets, Paper, Rubber lining, Glass, Ceramics, Concrete, Wood, Lacquer, Automotive and Enamel etc.
Digital electronic gauges measures accuracy of up to + 1% when reference standards are used while mechanical gauges are working on the magnetic permeability and based on residual magnetism in steel have lower accuracy of up to + 5%. Hand held coat thickness gauges are available with a constant pressure integral probe or detachable flexible probe. The flexible probe is capable of measuring intermittently on hot work.
Suitable for paint inspectors, painters, sand blasting contractors, finishing, anti- corrosion painting contractors, manufacturers, and automobile industries.

GLOSS METER

Glossmeters:
(1) Measure range:
Low level 0~199. 9 Gu
High Level 0~1999 Gu
(2) Stability: Less than ±0. 4Gs/30min
(3) Readout error: Less than ±1. 2Gu(Low level)
Less than ±12Gu(High level)
(4) Power supply: One 1. 5V AA alkaline battery or one rechargeable battery
Voltage: 0. 8V~1. 5V
(5) Cast angle: 60°
Facular dimension 60 degree: 11*22mm
(6)Measure oar dimension: 14*28mm
(7) Environment temperature: 0-40 C degree Relative humidity: Less then 85%
(8) Dimension: 142mm*32mm*64mm
Dimension of standard board: 67mm*46mm*13mm

Application: Suitable for paint, printing ink, coating, printing, paper, plastics, marbles etc. And widely applied in printing, packing, household appliance, automobile, machine tool, colored steel. Furniture, wooden floor, bamboo floor and so on. Features: Small and light, real easy to carry and use. One 1. 5V mignon alkaline Battery can be used for